TD-31050 Stabilizer Bar & Torsion Bar Tube Closing Machine | Hollow Tube End Spin Closing 1 TD-31050 Stabilizer Bar & Torsion Bar Tube Closing Machine | Hollow Tube End Spin Closing 2 TD-31050 Stabilizer Bar & Torsion Bar Tube Closing Machine | Hollow Tube End Spin Closing 3
  • TD-31050 Stabilizer Bar & Torsion Bar Tube Closing Machine | Hollow Tube End Spin Closing 4
  • TD-31050 Stabilizer Bar & Torsion Bar Tube Closing Machine | Hollow Tube End Spin Closing 4
  • TD-31050 Stabilizer Bar & Torsion Bar Tube Closing Machine | Hollow Tube End Spin Closing 4

TD-31050 Stabilizer Bar & Torsion Bar Tube Closing Machine | Hollow Tube End Spin Closing

ID：TD-31050-stabilizer bar
Introduction
—
TD-31050 hydraulic dome-type closing machine for hollow stabilizer bars, torsion bars and torsion beam tubes. Tube OD Ø10–50 mm; the tube end is cold spin-closed in one piece, with no heating, welding or plug, and no weld seam at the closure.
Specification
—
Tube OD
Ø10–50 mm
Add to Inquiry
Video
Stabilizer Bar / Torsion Beam Tube End Closing – NC Servo Closing Machine | TONG DA TD-382
Stabilizer Bar / Torsion Beam Tube End Closing – NC Servo Closing Machine | TONG DA TD-382
OD18×1.0 Tube End Closing – Torsion Bar & Stabilizer Bar Tubes, Gas Spring | TONG DA
OD18×1.0 Tube End Closing – Torsion Bar & Stabilizer Bar Tubes, Gas Spring | TONG DA
TD-31040 Gas Spring Cylinder Tube End Closing Machine | TONG DA
TD-31040 Gas Spring Cylinder Tube End Closing Machine | TONG DA
Stabilizer Bar Closed End Leak Test – Gas-Tight Weld-Free Tube Closing | TONG DA TD-382
Stabilizer Bar Closed End Leak Test – Gas-Tight Weld-Free Tube Closing | TONG DA TD-382
Hollow Stabilizer Bar End Closing – Programmable Dome Shape on Heavy-Wall Tube | TONG DA TD-382
Hollow Stabilizer Bar End Closing – Programmable Dome Shape on Heavy-Wall Tube | TONG DA TD-382
Detailed Information

What it does

When stabilizer bars and torsion bars move to hollow tube, the tube ends must be closed to keep water and dirt out. TD-31050 cold-spins the tube end into a dome that is one piece with the tube, with no weld seam.

Stabilizer bar tube end closing
Stabilizer bar tube end closing		Stabilizer bar end before and after closing
Stabilizer bar end before and after closing		Steel tubes with dome ends
Steel tubes with dome ends

Why spin closing

  • One piece: no weld seam, no plug joint
  • Cold forming, no heat: material properties unchanged, ready for further machining
  • Dome radius adjustable without a mold change

Machine highlights

  • Tube OD Ø10–50 mm; single-, two- and three-station sets
  • Size change: swap the jaw set and guide tube
  • PLC touch screen, one operator
  • Fully closed or with a center hole

TD-31050 or TD-382 NC?

For a fixed dome shape within Ø50 in high volume, choose TD-31050. For flats, holes, multi-step shapes, larger diameters or heavier walls, choose the TD-382 NC servo closing machine (servo X/Y axes, dome radius set freely).

FAQ

Can you trial-close my samples?
Yes. Send tube OD, wall, material and the end drawing to sales@tdco.com.tw.

Do you also offer contract closing?
Yes. TONG DA has built tube machines since 1989 and runs contract processing on its own machines.

Back
Other Products
TD-31050 Shock Absorber Tube Closing Machine | Two-Station Pipe End Closing, Ø15–50 mm
TD-31050 Shock Absorber Tube Closing Machine | Two-Station Pipe End Closing, Ø15–50 mm
TD-31050 is a patented hydraulic two-station arc-top closing machine for tube OD Ø15–50 mm and wall 0.8–3.0 mm. It cold roll-spins the tube end fully closed or with a center hole – no heating, welding or plastic plug. PLC touch control, inverter spindle speed and a strengthened forming unit make it suited to shock absorber cylinders and larger tubes.
TD-382 Stabilizer Bar Closing Machine | NC Servo Pipe End Closing for Torsion Beam & Heavy-Wall Tube
TD-382 Stabilizer Bar Closing Machine | NC Servo Pipe End Closing for Torsion Beam & Heavy-Wall Tube
Stabilizer bar and torsion beam tube closing machine. TD-382 is TONG DA’s NC servo tube end closing machine. The forming rollers are driven by servo X and Y axes and follow a programmed path, so the dome radius can be set freely and flat area and center hole are program settings too; a product change is a program recall. Built for large-diameter, heavy-wall tube and for parts with demanding or varied end shapes: automotive stabilizer bars and torsion beams, large shock absorber cylinders, hydraulic cylinder tubes, industrial gas springs. Used in a Japanese automotive supply chain, running in plants in Japan, Thailand and China.
TD-31050 Heat Exchanger & Header Tube Closing Machine | Large-Diameter Steel, Stainless & Copper Tube Ends
TD-31050 Heat Exchanger & Header Tube Closing Machine | Large-Diameter Steel, Stainless & Copper Tube Ends
TD-31050 hydraulic dome-type closing machine for heat exchanger, header, condenser and coil tubes. Tube OD Ø10–50 mm; the end is cold spin-closed in one piece, with no welded cap or plug, no heating and no oxide scale.
Cookie Notice
This website uses cookies to provide the best browsing experience. By continuing to use this site, you agree to our Cookie Policy. Learn More
Accept