WHC-88-29 Double-End Tube Notching Machine | Both Ends Notched in One Clamping

Name: WHC-88-29 Double-End Tube Notching Machine | Both Ends Notched in One Clamping
Brand: TONG DA Precision
SKU: 1e06b79d8716adf4
Availability: PreOrder

ID：WHC-88-29

Introduction

—

The WHC-88-29 double-end notching machine clamps a round tube once and mills saddle notches at both ends at the same time, for cross rails, braces and bars that weld to uprights at each end. Each head has its own cutter size and angle; both notches stay aligned without turning the part over. Used on furniture, bed frames, fitness equipment and motorcycle racks. Sold and serviced by TONG DA.

Video

WHC Double-End Tube Notching Machine | Both Tube Ends Notched at Once | TONG DA

WHC Double-End Tube Notching Machine | Saddle Notch for Cross Tube Joints | TONG DA

Detailed Information

What the machine does

Many cross rails in furniture and equipment weld to an upright at each end. A single-head notcher needs two cuts and a flip to keep the notches aligned; the WHC-88-29 carries a cutter head at each end, so one clamping notches both ends at once with the notches naturally aligned and the tube length fixed at the same time.

Features

Two heads cut simultaneously; both ends finished in one clamping.
Head spacing set to tube length; cutter size and angle set per head.
Hydraulic clamping and feed.
Steel, stainless and aluminum tube.

Typical parts

Chair and table cross rails, bed frame rails, fitness equipment frames, motorcycle racks, railing bars, shelving.

How to start

Send tube OD × wall × material × length, the mating tube OD and angle at each end, and quantity; TONG DA trial-cuts and replies.

Other names by market

USA / UK / India: tube notching machine, pipe notcher, tube notcher, fishmouth tube notcher, tube coping machine, tube end notching. Turkey: boru kertme makinesi, boru ağzı oyma makinesi. Brazil: máquina de boca de lobo, entalhadeira de tubos. Spain / Mexico: muescadora de tubos, máquina boca de pescado. China: 冲弧机、冲口机、铣弧机、钢管冲弧机. Taiwan: 沖弧機、銑弧機、管端沖弧、魚口加工.

Back

Previous Product

Other Products

WHC Hydraulic Tube Notching Machine (Horizontal Arc Milling) | Saddle Notch for Tube-to-Tube Joints

The WHC horizontal hydraulic notching machine mills an arc-shaped (saddle) notch in the end of a round tube to match the OD of the tube it joins, so the two weld with a tight, even seam. Hydraulic clamping and feed; the cutter is changed to suit the mating tube diameter. Used on furniture frames, motorcycle racks, fitness equipment, garden tool and hammer handles. Sold and serviced by TONG DA.